500W ACDC full brick
Advanced Energy’s Artesyn AIF42BAC-01N series full-brick module accepts a wide 90 to 264 Vac input. Rated at 504 watts, the module has a high conversion efficiency of 93% typically and provides a nominal isolated output voltage of 12 Vdc with a 10 V auxiliary output. Featuring an industry-standard 2.4 x 4.6 in fullbrick form factor and a height of only 0.55 in.
This family of modules is particularly focused on providing contact-cooled applications such as I.P. sealed applications where the power converters are located inside the applications I.P. Sealed casing.
The functions and features (such as internal inrush-limiting, active current-share, Auxiliary Output and PMBus) of this family have been provided to enable ease of use in applications with minimize external component requirements.
Product Training Videos
Total Max Power:
Total Max Current:
86 V to 264 V
10.8 V to 13.2 V
Size (L x W x H):
4.600" x 2.400" x 0.500"
-40 to 85degC Ambient
- Logic Control
- Input voltage: 90 - 264Vac
- Input voltage Frequency: 47hz to 63hz
- Input Inrush: Internal Inrush limiting
- Output Noise: 120mV pk-pk max (12V version)
- Output voltage: 12 Volts
- Output current : 42 Amps
- Auxilary Output: 10V at 250mA
- Hold-up HVDC: 380Vdc
- Control: PMBus interface
- Control : Output voltage sense
- Control: Output voltage Adjust -20% to +10% Vout
- Control: Active current share
- Control: PSU enable
- Control: PSU-Good signal
- Isolation: 4000Vdc Input to Output
- Isolation: 2500Vdc Input to Baseplate
- Isolation: 100Vdc Output to Baseplate
- Efficiency: >91.5% low-line input
- Parallel unit capability: Up to 10 units
- Thermal Derating : 100% power at 100degC baseplate
- Efficiency: >93.5% High-line input
- Internal Inrush current limiting is an extremely useful and critical function
- PMBus controlled.
- Active current share
- Power Good
- Output voltage sense.
- Output voltage Adjust
- Auxiliary Output
- 93% High efficiency
- 85V to 264Vac Wide input range
- External hold-up function