
48 V, 3 kW, Open Rack Rectifier with ATS
48 V, 3 kW, Open Rack Rectifier with ATS
For 18 kW & 30 kW 2RU, 19
Advanced Energy's Artesyn 48V, 3kW Open Rack Rectifier is a highline single phase AC-DC power supply that converts 200VAC~277VAC single-phase line into a 48VDC/62A (3kW) main output. Output DC Voltage range is narrow to eliminate
oversize design and enable 4:1 ratio for downstream 12V POL loads. Each PSU contains an Automatic Transfer Switch (ATS) for failover between dual AC inputs.
See also 48V, 30 kW, 2RU EIA 19” Power Shelf
- Specifications
- Special Features
- Models - Stock check
-
Total Max Power:
3,000 W -
Total Max Current:
60 A -
Input Voltage:
180 V to 305 V -
Output Voltage:
50 V to 50 V -
Outputs:
Single -
Size (L x W x H):
24.960" x 2.677" x 1.574" -
Warranty:
1 year -
Operating Temperature:
0-40
Electrical Specifications
- Input
- Output
- Input Voltage: 180-305 VAC
- Hold-up time: 25 ms @ 100% load, 200 to 277 Vac input
- iTHD (Load >30%): 5%
- Power Factor 10% and above: 95
- Set Point (20% Load): 49.65-49.75 V
- Droop (0~100% load) : -1.5 V
- Current: 0-62A
- Ripple & Noise (@ 20MHz BW) : 500 mVpp
- Output excursion (from nominal voltage) during tra: -1-+1v
- Greater than 96% efficiency from 240 to 277 Vac input with 30-100% load (peak efficiency of 97%)
- Automatic Transfer Switch (ATS) built in
- 68mm wide
- I2C Serial Communication
- > 24 msec hold up
- 200 VAC to 277 VAC input
- Active current sharing
- OCP compliant
- Hot pluggable PSUs
- Status LEDs for fault monitoring
- 30 kW total, 27 kW N+1, or 18 kW N+N