48 V, 3 kW, Open Rack Rectifier with ATS

For 18 kW & 30 kW 2RU, 19

Advanced Energy's Artesyn 48V, 3kW Open Rack Rectifier is a highline single phase AC-DC power supply that converts 200VAC~277VAC single-phase line into a 48VDC/62A (3kW) main output. Output DC Voltage range is narrow to eliminate
oversize design and enable 4:1 ratio for downstream 12V POL loads. Each PSU contains an Automatic Transfer Switch (ATS) for failover between dual AC inputs.

See also 48V, 30 kW, 2RU EIA 19” Power Shelf

Datasheet Press Releases Technical Documentation Print This Page

Specifications
Special Features
Models - Stock check

Total Max Power:
3,000 W
Total Max Current:
60 A
Input Voltage:
180 V to 305 V
Output Voltage:
50 V to 50 V
Outputs:
Single
Size (L x W x H):
24.960" x 2.677" x 1.574"
Warranty:
1 year
Operating Temperature:
0-40

Electrical Specifications

Input
Output

Input Voltage: 180-305 VAC
Hold-up time: 25 ms @ 100% load, 200 to 277 Vac input
iTHD (Load >30%): 5%
Power Factor 10% and above: 95

Set Point (20% Load): 49.65-49.75 V
Droop (0~100% load) : -1.5 V
Current: 0-62A
Ripple & Noise (@ 20MHz BW) : 500 mVpp
Output excursion (from nominal voltage) during tra: -1-+1v

Greater than 96% efficiency from 240 to 277 Vac input with 30-100% load (peak efficiency of 97%)
Automatic Transfer Switch (ATS) built in
68mm wide
I2C Serial Communication
> 24 msec hold up
200 VAC to 277 VAC input
Active current sharing
OCP compliant
Hot pluggable PSUs
Status LEDs for fault monitoring
30 kW total, 27 kW N+1, or 18 kW N+N