Intelligent Transfer Switch

Up to 24000 Watts

Advanced Energy's Artesyn Intelligent Transfer Switch (iTS™) is designed for any application needing power switched to different loads during a 24 hour period (i.e. Horticulture, Burn-in, Test and Measurement, etc.). Advanced Energy’s Intelligent Transfer Switch has a built-in PSU to supply power to the relays and MCU module. It is designed to operate with 2 phases of a 3-PH input mains up to 480VAC nominal, or standard Phase and Neutral of single-phase mains.

Datasheet Press Releases Technical Documentation Print This Page
  • Total Max Power:
    24,000 W
  • Total Max Current:
    200 A
  • Input Voltage:
    125 V to 250 V
  • Output Voltage:
  • Outputs:
  • Size (L x W x H):
    12.600" x 17.600" x 3.150"
  • Warranty:
    5 years
  • Operating Temperature:
    0°C to +50°C at 100% rate

Electrical Specifications

  • Input
  • Output
  • Logic Control
  • Isolation
  • Other
  • Input Voltage - Control: 186-480 Vac Nominal; 1 or 2 phase
  • Input Voltage - Relay Module: 250V nominal contact rating per module
  • Input Current - Relay Module: 25A max contact rating per module
  • Input Frequency - Control: 50/60 Hz Nominal
  • # of Relay Modules : Up to 8
  • Relay Coil from Control: 12Vdc @ 1A for up to 8 relay modules (96W max)
  • PRESENT (OUTPUT): Low asserted if relay module present
  • Drive_A (INPUT): High asserted to drive relay to A position
  • Drive_B (INPUT): High asserted to drive relay to B position
  • FAULT_1 (OUTPUT): Low asserted to trigger fault if coil voltage >5V
  • FAULT_2 (OUTPUT): Low asserted to trigger if outputs A and B active
  • SGND (OUTPUT): Digital ground reference for MCU
  • EMC/IMMUNITY: EN61000-4-X (see datasheet)
  • Primary-to-EARTH: 2500Vdc
  • Primary-to-Secondary: 2500Vdc
  • Secondary-to-Earth: 2500Vdc
  • 19: changeable from front to back
  • 5 years manufacturer’s warranty
  • Modular 8 channel A:B switch
  • Standard 19” rack
  • Reversable mounting tabs
  • Designed for use with iHP and LCM4000 product families
  • 100% digital control
  • Intelligent zero current switching when used with Artesyn devices
  • Digital communication via RS485 (Modbus-RTU)
  • Cloud based User configurable GUI
  • Natural convection cooled (No Fan)
  • Field upgradeable firmware
  • Up to 16 racks are addressable from one control node
  • Configurable baud rate
  • MTBF 400K hours per Telecordia SR-332 Method 1 Case 4, Part Stress

Let us help with your product selection

New Search by Requirements

Sales Support
☒ Close