LPT100-M Series
80—130 Watt AC-DC Medical Power Supplies
The LPT100-M series of triple output open-frame AC-DC power supplies features ITE and medical safety approvals. There is a choice of four models, covering output voltages from 3.3 V to 24 V. The power supplies have a typical full load power conversion efficiency of 82% and with a height of only 1.28 inches offer a power density in excess of 12 watts per cubic inch. LPT100-M power supplies are primarily designed for use in information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications.
Datasheet Press Releases Technical Documentation Product Training Module Print This Page- Specifications
- Special Features
- Models - Stock check
-
Total Max Power:
130 W -
Total Max Current:
18 A -
Input Voltage:
90 V to 264 V -
Output Voltage:
-16.5 V to 28.8 V -
Outputs:
Triple -
Size (L x W x H):
4.000" x 2.000" x 1.280" -
Warranty:
2 years -
Operating Temperature:
-20°C to +70°C
Electrical Specifications
- Input
- Output
- Frequency: 47 - 63 Hz
- Inrush current: 50 A max., cold start @ 25°C
- Efficiency: 82% typical at full load
- Input range: 90 - 264 VAC, 120 - 300 VDC
- Safety ground leakage current: 275 uA @ 50/60 Hz, 264 VAC input
- Power fail: Active low TTL logic signal
- Adjustment range: All outputs -40% to +10% except for 24 V
- Overload protection: Short circuit and case overload protected
- Hold-up time: 10 ms @ 130 W load, 120 VAC input
- Remote Sense: Compensates for 0.5 V lead drop on main output
- Medical and ITE safeties
- Active power factor correction
- 2 x 4 x 1U form factor
- Overload protection
- Built-in Class B EMI filter
- Remote sense
- EN61000-3-2 compliant
- Adjustable outputs
- Power fail
- Thermal overload protection
- Overvoltage protection
